- MYSPHERE 3.x Fabric Cover Removal Guide -
You will need a small Torx T5 screwdriver to remove the clamping plate holding the fabric covers in place. You can find this in most phone repair kits or a precision screwdriver set.
1. Remove the covers from the driver frame. These are magnetically attached, have small guide pins and pull off with a bit of force. A fingernail along the front edge helps getting it started for removal. It's easier to work on if you remove the ear frame from the head bow first but this is not required.
4. Reassemble the frame by inserting the clamp plate and screws back into place. Be careful not to apply too much pressure to prevent stripping the screws or threads. Make sure the clamp plate is sitting flat and the guide pins are aligned before inserting the driver covers back into the driver frames.
5. Listen to your transformed MYSPHERE. You can decide to revert back at any time.
- Changes in sound with the Fabric cover removed -
I would certainly recommend this to anyone that finds the stock setting a bit too reserved in the upper end of the sound spectrum or wants a more energetic presentation to the music. The adjustability of the sound presentation is a great feature of the MYSPHERE and this technique adds another possibility to that equation making for an even more versatile listening experience.
Much praise goes to the main designer of the MYSPHERE Heinz Renner for producing a unique and versatile pair of headphones that takes the concept of a fully open driver design to the next level.